2016 – MX-5 – Body and Accessories

SIDE TURN LIGHT REMOVAL/INSTALLATION

1. Turn the steering wheel to the side where the light is to be removed until it locks.

2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3. Partially peel back the front mudguard No.2 (See FRONT MUDGUARD REMOVAL/INSTALLATION.)

4. Disconnect the connector.

5. While pressing the side turn light tab in the direction of arrow (1) shown in the figure, press the side turn light in the direction of arrow (2) and detach the side turn light tab from the front fender panel.

6. Pull the side turn light in the direction of arrow (3) shown in the figure and remove it from the front fender panel.

7. Install in the reverse order of removal.

< Previous Next >