Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TOP LOCK STRIKER REMOVAL/INSTALLATION

< Previous Next >

2016 – MX-5 – Body and Accessories

TOP LOCK STRIKER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the following parts:

a. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

b. Female wedge (See FEMALE WEDGE REMOVAL/INSTALLATION.)

c. Front header trim (See FRONT HEADER TRIM REMOVAL/INSTALLATION.)

3. Disconnect the connector.

4. Remove the screws.

5. Remove the top lock striker.

6. Install in the reverse order of removal.

  • When installing the top lock striker installation screws, tighten the screws in the order shown in the figure.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.