2016 – MX-5 – Body and Accessories

CENTER PANEL No.2 REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Install the following parts:

a. Passenger-side scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION.)

b. Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

c. Passenger-side A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

d. Passenger-side lower panel (See PASSENGER-SIDE LOWER PANEL REMOVAL/INSTALLATION.)

3. Move the center panel No.2 in the direction of the arrow shown in the figure, and detach clips A and B from the dashboard.

4. Disconnect the connector.

5. Remove the center panel No.2.

6. Install in the reverse order of removal.

< Previous Next >