2016 – MX-5 – Body and Accessories

FUEL-FILLER LID LOCK ACTUATOR REMOVAL/INSTALLATION

1. Open the trunk lid.

2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION.)

4. Partially peel back the trunk side trim (LH) to the position allowing removal of the fuel-filler lid lock actuator. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

5. Disconnect the connector.

6. Remove the nut.

7. Remove the fuel-filler lid lock actuator.

8. Install in the reverse order of removal.

< Previous Next >