DOOR LOCK SWITCH INSPECTION
2016 – MX-5 – Body and Accessories
DOOR LOCK SWITCH INSPECTION
LH
Door Lock Switch Inspection
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the door trim. (See DOOR TRIM REMOVAL/INSTALLATION)
3. Remove the power window main switch. (See POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION)
4. Verify that the continuity is as indicated in the table.
-
If the continuity is not as indicated in the table, replace the power window main switch.
LED Illumination Inspection
-
The door lock switch is built into the power window main switch.
-
If the door lock switch inspection is performed, perform the inspection referring to the [POWER WINDOW MAIN SWITCH INSPECTION]. (See POWER WINDOW MAIN SWITCH INSPECTION.)
RH
Door Lock Switch Inspection
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the door trim. (See DOOR TRIM REMOVAL/INSTALLATION)
3. Remove the door lock switch. (See DOOR LOCK SWITCH REMOVAL/INSTALLATION.)
4. Verify that the continuity is as indicated in the table.
-
If the continuity is not as indicated in the table, replace the door lock switch.
LED Illumination Inspection
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the door trim. (See DOOR TRIM REMOVAL/INSTALLATION)
3. Remove the door lock switch. (See DOOR LOCK SWITCH REMOVAL/INSTALLATION.)
4. Apply battery voltage to door lock switch terminal A, and connect terminal B to ground.
5. Verify that the LED turns on.
-
If the LED does not turn on, replace the door lock switch.