Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

POWER WINDOW MOTOR INSPECTION

< Previous Next >

2016 – MX-5 – Body and Accessories

POWER WINDOW MOTOR INSPECTION

Driver-side

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the door trim. (Driver-side) (See DOOR TRIM REMOVAL/INSTALLATION.)

3. Disconnect the power window motor connector.

4. Apply battery positive voltage and connect the ground to power window motor terminals G and A, and then inspect the power window motor operation.

B+ Terminal

Ground Terminal

Operation

G

A

Close

A

G

Open

5. Connect the battery positive voltage to power window motor terminal D and connect terminal H to ground.

6. Operate the power window motor and verify the wave patterns for terminals B and F.

  • Terminal:

    B(+), F(+) ↔ ground (-)

  • Oscilloscope setting: 2 V/DIV (Y), 1 ms/DIV (X), DC range

Passenger-side

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the door trim. (Passenger-side) (See DOOR TRIM REMOVAL/INSTALLATION.)

3. Disconnect the power window motor connector.

4. Apply battery positive voltage and connect the ground to power window motor terminals G and A, and then inspect the power window motor operation.

B+ Terminal

Ground Terminal

Operation

G

A

Close

A

G

Open

5. Connect the battery positive voltage to power window motor terminal D and connect terminal H to ground.

6. Operate the power window motor and verify the wave patterns for terminals B and F.

  • Terminal:

    B(+), F(+) ↔ ground (-)

  • Oscilloscope setting: 2 V/DIV (Y), 1 ms/DIV (X), DC range

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.