Description

• U0001:88

• Module communication error (HS-CAN)

• U0100:00

• Communication error with PCM

• U0101:00

• Communication error with TCM

• U0121:00

• Communication error with DSC HU/CM

• U0151:00

• Communication error with SAS control module

• U0155:00

• Communication error with instrument cluster

• U0214:00

• Communication error with start stop unit

• U023A:00

• Communication error with forward sensing camera (FSC)

Detection condition

• U0001:88

• BCM detects the CAN bus communication line (HS-CAN) malfunction 10 times continuously with the ignition switched ON (engine off or on).

• U0100:00

• BCM could not receive the CAN signal from the PCM for 5 s or more with the ignition switched ON (engine off or on).

• U0101:00

• BCM could not receive the CAN signal from the TCM for 5 s or more with the ignition switched ON (engine off or on).

• U0121:00

• BCM could not receive the CAN signal from the DSC HU/CM for 5 s or more with the ignition switched ON (engine off or on).

• U0151:00

• BCM could not receive the CAN signal from the SAS control module for 5 s or more with the ignition switched ON (engine off or on).

• U0155:00

• BCM could not receive the CAN signal from the instrument cluster for 5 s or more with the ignition switched ON (engine off or on).

• U0214:00

• BCM could not receive the CAN signal from the start stop unit for 5 s or more with the ignition switched ON (engine off or on).

• U023A:00

• BCM could not receive the CAN signal from the forward sensing camera (FSC) for 5 s or more with the ignition switched ON (engine off or on).

Fail-safe

• U0001:88

Exterior lighting system

• Turn the TNS (parking lights) and headlights LO on, and turn off other exterior light controls.

Auto light system

• Continue the controls prior to the auto light malfunction detection.

Interior light control system

• Continue the controls prior to the interior light malfunction detection for 5 s and turn the light on using the initial value after 5 s have elapsed.

Wiper system

• Continue the controls prior to the wiper malfunction detection.

Washer system

• Stop the washer control.

Auto wiper system

• Continue the controls prior to the wiper malfunction detection.

Blower system

• BCM power supply condition is on: Turn the blower relay on.

• BCM power supply condition is off: Turn the blower relay off.

• U0100:00

Auto light system

• Continue the controls prior to the auto light malfunction detection.

Auto wiper system

• Continue the controls prior to the wiper malfunction detection.

• U0101:00

• Not applicable

• U0121:00

• Not applicable

• U0151:00

• Not applicable

• U0155:00

Interior light control system

• Continue the controls prior to the interior light malfunction detection for 5 s and turn the light on using the initial value after 5 s have elapsed.

Blower system

• BCM power supply condition is on: Turn the blower relay on.

• BCM power supply condition is off: Turn the blower relay off.

• U0214:00

Exterior lighting system

• Turn the TNS (parking lights) and headlights LO on, and turn off other exterior light controls.

Auto light system

• Continue the controls prior to the auto light malfunction detection.

Wiper system

• Continue the controls prior to the wiper malfunction detection.

Washer system

• Stop the washer control.

Auto wiper system

• Continue the controls prior to the wiper malfunction detection.

• U023A:00

• Not applicable

Possible cause

• Malfunction in CAN bus communication line

• Malfunction in CAN line between PCM and BCM

• Malfunction in CAN line between TCM and BCM

• Malfunction in CAN line between DSC HU/CM and BCM

• Malfunction in CAN line between SAS control module and BCM

• Malfunction in CAN line between instrument cluster and BCM

• Malfunction in CAN line between start stop unit and BCM

• Malfunction in CAN line between forward sensing camera (FSC) and BCM

System wiring diagram

Not applicable