Description

Insufficient remote transmitter programming number

Detection condition

• Start stop unit detects that the number of programmed remote transmitters is less than 2.

Fail-safe

Not applicable

Possible cause

• Insufficient number of remote transmitters programmed

• Start stop unit malfunction

System wiring diagram

Not applicable

Step

Inspection

Action

1

• Display PID NUM_TRNSMIT using the M-MDS.

  (See PID/DATA MONITOR INSPECTION [START STOP UNIT].)

• Is the number of programmed remote transmitters less than 2?

Yes

Perform the additional remote transmitter programming, then go to the next step.

(See IMMOBILIZER SYSTEM-RELATED PARTS PROGRAMMING.)

No

Go to the next step.

2

• Clear the DTC for the start stop unit using the M-MDS.

  (See CLEARING DTC [START STOP UNIT].)

• Retrieve the start stop unit DTCs using the M-MDS.

  (See DTC INSPECTION [START STOP UNIT].)

• Is the security indicator light: 21, DTC B13D4:00/P1260:00 displayed?

Yes

Replace the start stop unit, then go to the next step.

(See START STOP UNIT REMOVAL/INSTALLATION.)

No

Go to the next step.

3

• Are any other DTCs displayed?

Yes

Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [START STOP UNIT].)

No

DTC troubleshooting completed.