BACK-UP LIGHT BULB REMOVAL/INSTALLATION
2016 – MX-5 – Body and Accessories
BACK-UP LIGHT BULB REMOVAL/INSTALLATION
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Turn the socket counterclockwise and remove it in the direction of arrow (1) shown in the figure.
CAUTION:
-
If there is oil or dirt on the surface of the light bulb, excessive heat will build up and the life of the light bulb will be shortened. If the light bulb glass area is touched, wipe off any dirt using a soft cloth dampened with detergent diluted in water (approx. 5 %).
3. Remove the back-up light bulb.
4. Install in the reverse order of removal.