Description

Instrument cluster configuration error

Detection condition

• Instrument cluster configuration error (incorrect value write) detected.

Fail-safe

Not applicable

Possible cause

• Instrument cluster configuration error

• Instrument cluster malfunction

System wiring diagram

Not applicable

Step

Inspection

Action

1

• Using the M-MDS, perform the instrument cluster configuration (using As-Built data).

  (See INSTRUMENT CLUSTER CONFIGURATION (USING AS-BUILT DATA).)

• Clear the DTC for the instrument cluster using the M-MDS.

  (See CLEARING DTC [INSTRUMENT CLUSTER].)

• Retrieve the instrument cluster DTCs using the M-MDS.

  (See DTC INSPECTION [INSTRUMENT CLUSTER].)

• Is the same DTC displayed?

Yes

Using the M-MDS, perform the instrument cluster configuration (using As-Built data) again, then go to the next step.

(See INSTRUMENT CLUSTER CONFIGURATION (USING AS-BUILT DATA).)

No

Go to Step 3.

2

• Clear the DTC for the instrument cluster using the M-MDS.

  (See CLEARING DTC [INSTRUMENT CLUSTER].)

• Retrieve the instrument cluster DTCs using the M-MDS.

  (See DTC INSPECTION [INSTRUMENT CLUSTER].)

• Is the same DTC displayed?

Yes

Replace the instrument cluster, then go to the next step.

(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

No

Go to the next step.

3

• Are any other DTCs displayed?

Yes

Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [INSTRUMENT CLUSTER].)

No

DTC troubleshooting completed.