2016 – MX-5 – Engine

ENGINE OIL LEVEL INSPECTION [SKYACTIV-G 2.0]

1. Position the vehicle on level ground.

2. Warm up the engine.

3. Stop the engine and allow at least 5 min before continuing.

4. Remove the dipstick, wipe it cleanly, and reinstall it fully.

5. Remove the dipstick and verify that the oil level is between the F and L marks on the dipstick.

• If the oil level is below or near the L mark, add engine oil. (See ENGINE OIL REPLACEMENT [SKYACTIV-G 2.0].)

• If the oil level is above the F mark, penetration of fuel into the engine oil can be considered. Replace the engine oil. (See ENGINE OIL REPLACEMENT [SKYACTIV-G 2.0].)

6. Insert the oil level gauge completely until it attaches to the cylinder head cover.

< Previous Next >