Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TCM REMOVAL/INSTALLATION [SJ6A-EL]

< Previous Next >

2016 – MX-5 – Transmission/Transaxle

TCM REMOVAL/INSTALLATION [SJ6A-EL]

CAUTION:

  • Do not drop or apply a shock to the TCM. Replace the TCM if it has been dropped or received an impact.

  • Make sure that your hand does not touch the terminal as the connector terminal could be damaged.

  • Water or foreign objects entering the connector can cause a poor connection or corrosion. Be sure not to drop water or foreign objects on the connector when disconnecting it.

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Disconnect the connectors.

3. Remove the TCM.

4. Install in the reverse order of removal.

5. Perform the “Initial Learning” (TCM replacement). (See INITIAL LEARNING PROCEDURE [SJ6A-EL].)

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.