Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DTC U2300:54/U2300:55/U2300:56 [EPS CONTROL MODULE]

< Previous Next >

2016 – MX-5 – Steering

DTC U2300:54/U2300:55/U2300:56 [EPS CONTROL MODULE]

DTC

U2300:54

Configuration

U2300:55

U2300:56

DETECTION CONDITION

  • Configuration error is detected.

FAIL-SAFE FUNCTION

POSSIBLE CAUSE

  • Configuration procedure is not done properly

  • Correct data cannot be received from instrument cluster

SYSTEM WIRING DIAGRAM

Diagnostic Procedure

Step

Inspection

Action

1

RECORD CONFIGURATION DATA

  • Switch the ignition OFF.

  • Switch the ignition ON (engine off or on), and maintain this condition for approx. 1 min.

  • Switch the ignition OFF, and maintain this condition for approx. 3 s.

  • Switch the ignition ON (engine off or on).

Go to the next step.

2

VERIFY EPS CONTROL MODULE DTC

Yes

Repeat the inspection from Step1.

If the malfunction recurs, go to the next step.

No

Go to Step5.

3

VERIFY INSTRUMENT CLUSTER DTC

Yes

Go to the applicable DTC inspection.

(See DTC TABLE [INSTRUMENT CLUSTER].)

Repair the instrument cluster, then perform the configuration for the instrument cluster.

(See INSTRUMENT CLUSTER DISASSEMBLY/ASSEMBLY.)

(See INSTRUMENT CLUSTER CONFIGURATION (USING AS-BUILT DATA).)

No

Go to the next step.

4

VERIFY EPS CONTROL MODULE DTC

Yes

Repeat the inspection from Step1.

If the malfunction recurs, replace the EPS control module, then go to the next step.

(See ELECTRIC POWER STEERING (EPS) CONTROL MODULE REMOVAL/INSTALLATION.)

No

Go to the next step.

5

VERIFY NO DTC IS PRESENT

  • Are any DTCs present?

Yes

Go to the applicable DTC inspection.

(See DTC TABLE [EPS CONTROL MODULE].)

No

DTC troubleshooting completed.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.