Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

NOT P POSITION SWITCH INSPECTION

< Previous Next >

2016 – MX-5 – Transmission/Transaxle

NOT P POSITION SWITCH INSPECTION

NOTE:

  • The not P position switch is built into the selector lever component.

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the following parts:

a. Selector lever knob (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION.)

b. Shift panel component (See SHIFT PANEL REMOVAL/INSTALLATION.)

3. Disconnect the selector lever component connector.

4. Verify that the continuity between selector lever component terminals B and G.

Not P position switch specification

Test condition

Continuity

Selector lever is in the P position.

No continuity

Selector lever is not in the P position.

Continuity

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.