Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DTC U0452:00/U0452:82 [DSC HU/CM]

< Previous Next >

2016 – MX-5 – Brakes

DTC U0452:00/U0452:82 [DSC HU/CM]

DTC

U0452:00

Signal error from SAS control module

U0452:82

DETECTION CONDITION

  • Error detected in signal from SAS control module via CAN communication.

FAIL-SAFE FUNCTION

POSSIBLE CAUSE

  • SAS control module malfunction

SYSTEM WIRING DIAGRAM

Diagnostic Procedure

Step

Inspection

Action

1

VERIFY SAS CONTROL MODULE DTC

Yes

Go to the applicable DTC inspection.

(See DTC TABLE [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)

(See DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

DTC troubleshooting completed, then go to the next step.

No

Go to the next step.

2

VERIFY DTC TROUBLESHOOTING COMPLETED

Yes

Repeat the inspection from Step1

If the malfunction recurs, replace the SAS control module, then go to the next step.

(See SAS CONTROL MODULE REMOVAL/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM].)

(See SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM].)

No

Go to the next step.

3

VERIFY NO DTC IS PRESENT

  • Are any DTCs present?

Yes

Go to the applicable DTC inspection.

(See DTC TABLE [DSC HU/CM].)

No

DTC troubleshooting completed.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.