MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO.2 REMOVAL/INSTALLATION [SKYACTIV-G 2.0]
2016 – MX-5 – Engine
MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO.2 REMOVAL/INSTALLATION [SKYACTIV-G 2.0]
NOTE:
-
The IAT sensor No.2 is built into the MAP sensor. When replacing the IAT sensor No.2, replace the MAP sensor/IAT sensor No.2.
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the following parts:
a. Wiper arm (See WIPER ARM AND BLADE REMOVAL/INSTALLATION.)
b. Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION.)
c. Front suspension tower bar (Vehicles with front suspension tower bar) (See FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION.)
d. Air box complete (See AIR BOX COMPLETE REMOVAL/INSTALLATION.)
3. Disconnect the MAP sensor/IAT sensor No.2 connector.
4. Remove the screw.
5. Remove the MAP sensor/IAT sensor No.2.
6. Install in the reverse order of removal.