Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

PURGE SOLENOID VALVE REMOVAL/INSTALLATION [SKYACTIV-G 2.0]

< Previous Next >

2016 – MX-5 – Engine

PURGE SOLENOID VALVE REMOVAL/INSTALLATION [SKYACTIV-G 2.0]

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the seal cover. (See SEAL COVER REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

3. Remove in the order indicated in the table.

4. Install in the reverse order of removal.

1

Purge solenoid valve connector

2

Vacuum hose

(See Vacuum Hose Installation Note.)

3

Purge solenoid valve

4

Bracket

5

Evaporative hose No.1

(See Evaporative Hose No.1 Installation Note.)

6

Catch tank

Evaporative Hose No.1 Installation Note

1. Install the evaporative hose No.1 as shown in the figure.

Vacuum Hose Installation Note

1. Install the vacuum hose as shown in the figure.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.