CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE
2016 – MX-5 – Body and Accessories
CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE
Door Locks Systems
1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [Vehicle] on the center display.
4. Select [Door Lock] on the center display.
5. Select an item name, and then select option.
Power Door Lock System
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Auto Door Lock Mode |
Auto door lock function can be changed. |
Lock: When Driving, Unlock: IGN Off |
Off / Lock: When Driving, Unlock: In Park / Lock: When Driving / Lock: When Driving, Unlock: IGN Off / Lock: Shifting from Park / Lock: Shifting from Park, Unlock: In Park |
BCM |
|
Unlock Mode |
2-step unlocking system can be set. |
Once Driver’s, Twice: All Doors |
Once: ALL Doors / Once Driver’s, Twice: All Doors |
BCM |
|
Reset |
Returns the setting content of the door lock system to the initial setting. |
No |
No / Yes |
|
Advanced keyless entry system
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Keyless Lock Beep Volume |
The keyless beeper volume can be adjusted. |
Medium |
High / Medium / Low / Off |
Start stop unit |
|
Auto Relock Time |
The operation start time of the auto re-lock function can be changed. |
60 seconds |
30 seconds / 60 seconds / 90 seconds |
Start stop unit |
|
Walk Away Lock |
The out-of-area (reception area) type auto lock function can be set. |
Off |
Off / On |
Start stop unit |
|
Reset |
Returns the setting content of the door lock system to the initial setting. |
No |
No / Yes |
|
Keyless entry system
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Auto Relock Time |
The operation start time of the auto re-lock function can be changed. |
60 seconds |
30 seconds / 60 seconds / 90 seconds |
Start stop unit |
|
Reset |
Returns the setting content of the door lock system to the initial setting. |
No |
No / Yes |
|
Lighting Systems
1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [Vehicle] on the center display.
4. Select [Lighting] on the center display.
5. Select an item name, and then select option.
Room light control system
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Interior Light Timeout – Doors Open |
|
30 minutes |
60 minutes / 30 minutes / 10 minutes |
BCM |
|
Interior Light Timeout – Doors Closed |
The map light illumination time after all the doors are closed can be changed. |
15 seconds |
60 seconds / 30 seconds / 15 seconds / 7.5 seconds |
BCM |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|
High beam control (HBC) system
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
High Beam Control |
The high beam control (HBC) system can be switched between operable and inoperable. |
On |
On / Off |
FSC |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|
Adaptive front lighting system (AFS)
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Adaptive Front-lighting System |
The adaptive front lighting system (AFS) can be switched between operable and inoperable. |
On |
On / Off |
Adaptive front lighting system (AFS) control module |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|
Lights-on reminder warning alarm
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Light On Reminder Vol |
The volume for the lights-on reminder warning alarm can be changed. |
Off |
High / Low / Off |
Instrument cluster |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|
Daytime running light (DRL) system (except canada)
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Daytime Running Lights |
The DRL system function can be set. |
On |
On / Off |
BCM |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|
Auto light system
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Auto Headlight On |
Auto light sensitivity can be changed. |
Medium |
Light / Medium Light / Medium / Medium Dark / Dark |
BCM |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|
Auto light-off system
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Headlight Off Timer |
The headlight emitted time of the auto light off timer can be changed. |
30 seconds |
120 seconds / 90 seconds / 60 seconds / 30 seconds / Off |
BCM |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|
Coming home light system
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Coming Home Lights Timer |
The coming home light system operation time can be switched. |
30 seconds |
Off / 30 seconds / 60 seconds / 90 seconds / 120 seconds |
BCM |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|
Leaving home light system
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Leaving Home Lights |
The leaving home light system can be switched between operable and inoperable. |
On |
On / Off |
BCM |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|
Auto Wiper System
1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [Vehicle] on the center display.
4. Select an item name, and then select option.
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Rain Sensing Wiper |
The auto wiper function can be disabled. |
On |
On / Off*1 |
BCM |
- *1
- If the function is set to “Off”, the wipers will operate intermittently with the wiper switch in AUTO position.
Blind Spot Monitoring (BSM) System
1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [Safety] on the center display.
4. Select an item name, and then select option.
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Blind Spot Monitor Volume |
The volume of the blind spot monitoring (BSM) warning alarm can be changed. |
High |
High / Low / Off |
Instrument cluster |
Lane Departure Warning System (LDWS)
1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [Safety] on the center display.
4. Select [Lane Departure Warning System] on the center display.
5. Select an item name, and then select option.
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Timing |
The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed. |
Before Line |
At Line / Before Line |
FSC |
|
Warning |
The warning operation sensitivity of the lane departure warning system (LDWS) can be changed. |
Low |
High / Low |
FSC |
|
Sound |
The type of the LDWS warning alarm can be changed. |
Beep |
Beep / Rumble |
Instrument cluster |
|
Beep Volume |
The volume of the LDWS warning alarm (Beep) can be changed. |
High |
High / Low |
Instrument cluster |
|
Rumble Strip Volume |
The volume of the LDWS warning alarm (Rumble) can be changed. |
High |
High / Mid / Low |
Instrument cluster |
|
Reset |
Returns the setting content of the lane departure warning system to the initial setting. |
No |
No / Yes |
|
Turn Light System
1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [Vehicle] on the center display.
4. Select [Turn] on the center display.
5. Select an item name, and then select option.
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
3-Flash Turn Signal |
The turn light system can be switched between operable and inoperable. |
On |
On / Off |
BCM |
|
Turn Signal Volume |
The volume of the turn and hazard indicator alarm can be changed. |
Low |
High / Low |
Instrument cluster |
|
Reset |
Returns the setting content of the turn light system to the initial setting. |
No |
No / Yes |
|
Language
1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [System] on the center display.
4. Select an item name, and then select option.
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Language |
The display language can be changed. |
US English |
US English / Spanish / Canadian French |
Connectivity master unit (CMU) |
Distance
1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [System] on the center display.
4. Select an item name, and then select option.
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Distance |
The distance unit can be changed. |
Miles or km*1 |
Miles / km |
Instrument cluster |
- *1
- The initial value differs depending on the market.
Temperature
1. Switch the ignition ON (engine off or on).
2. Select [Settings] on the center display.
3. Select [System] on the center display.
4. Select an item name, and then select option.
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Temp*1 |
The temperature unit can be changed. |
°F or °C*2 |
°F / °C |
Instrument cluster |
- *1
- When the ambient temperature display is switched, the set A/C cabin temperature display is also changed.
- *2
- The initial value differs depending on the market.
Fuel Economy Monitor
1. Switch the ignition ON (engine off or on).
2. Select [Application] on the center display.
3. Select [Fuel economy monitor] on the center display.
4. Press the setting button on the menu screen.
5. Select an item name, and then select option.
|
Display of center display |
Function |
Initial setting |
Settings |
Control module |
|
Show Screen at Ignition Off |
The ending screen of the fuel monitor can be switched between display/non-display. |
Off |
On / Off |
Connectivity master unit (CMU) |
|
Sync Average and Trip A |
The function which synchronizes the reset of the fuel reset and trip meters can be switched between on/off. |
Off |
On / Off |
Connectivity master unit (CMU) |