Menu +
Generic selectors
Exact matches only
Search in title
Search in content

STEERING WHEEL BEZEL REMOVAL/INSTALLATION

< Previous Next >

2016 – MX-5 – Steering

STEERING WHEEL BEZEL REMOVAL/INSTALLATION

WARNING:

1. Disconnect the negative battery cable and wait for 1 min or more. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION. )

2. Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE REMOVAL [TWO-STEP DEPLOYMENT CONTROL SYSTEM].) (See DRIVER-SIDE AIR BAG MODULE REMOVAL [STANDARD DEPLOYMENT CONTROL SYSTEM].) (See DRIVER-SIDE AIR BAG MODULE INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM].) (See DRIVER-SIDE AIR BAG MODULE INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM].)

3. Remove the steering wheel. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)

4. Remove the steering shift switch. (With steering shift switch) (See STEERING SHIFT SWITCH REMOVAL/INSTALLATION [SJ6A-EL].)

5. Remove the steering wheel cover. (See STEERING WHEEL COVER REMOVAL/INSTALLATION.)

6. Warm up the shaded area shown in the figure and soften the hard plastic area of the steering wheel using a heat gun.

7. Pull the part of the steering wheel bezel near tabs A and B and detach the tabs.

8. Warm up the shaded area shown in the figure and soften the hard plastic area of the steering wheel using a heat gun.

9. Pull the part of the steering wheel bezel near tabs C and remove the steering wheel bezel.

10. Install in the reverse order of removal.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.