Menu +
Generic selectors
Exact matches only
Search in title
Search in content

STEERING WHEEL SIDE COVER REMOVAL/INSTALLATION

< Previous Next >

2016 – MX-5 – Steering

STEERING WHEEL SIDE COVER REMOVAL/INSTALLATION

WARNING:

1. Disconnect the negative battery cable and wait for 1 min or more. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION. )

2. Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE REMOVAL [TWO-STEP DEPLOYMENT CONTROL SYSTEM].) (See DRIVER-SIDE AIR BAG MODULE REMOVAL [STANDARD DEPLOYMENT CONTROL SYSTEM].) (See DRIVER-SIDE AIR BAG MODULE INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM].) (See DRIVER-SIDE AIR BAG MODULE INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM].)

3. Remove the steering wheel. (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)

4. Remove the steering shift switch. (With steering shift switch) (See STEERING SHIFT SWITCH REMOVAL/INSTALLATION [SJ6A-EL].)

5. Remove the steering wheel cover. (See STEERING WHEEL COVER REMOVAL/INSTALLATION.)

6. Remove the steering wheel bezel. (See STEERING WHEEL BEZEL REMOVAL/INSTALLATION.)

7. Warm up the shaded area shown in the figure and soften the hard plastic area of the steering wheel using a heat gun.

8. Remove the steering wheel side cover by pulling it and detaching tabs A, B, and C.

9. Install in the reverse order of removal.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.