< Previous Next >

2016 – MX-5 – Body and Accessories

HORN INSPECTION

Horn LO

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the following parts:

a. Front under cover (See FRONT UNDER COVER REMOVAL/INSTALLATION.)

b. Seal plate (RH) (See SEAL PLATE REMOVAL/INSTALLATION.)

c. Horn LO (See HORN REMOVAL/INSTALLATION.)

3. Connect the battery voltage to horn LO terminal A, and connect the ground to the horn LO retaining bolt.

4. Verify that the horn LO sounds.

• If the horn LO does not sound, replace the horn LO. (See HORN REMOVAL/INSTALLATION.)

Horn HI

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Partially peel back the front mudguard No.1 (RH). (See FRONT MUDGUARD REMOVAL/INSTALLATION.)

3. Remove the horn HI. (See HORN REMOVAL/INSTALLATION.)

4. Connect the battery voltage to horn HI terminal A, and connect the ground to the horn HI retaining bolt.

5. Verify that the horn HI sounds.

• If the horn HI does not sound, replace the horn HI. (See HORN REMOVAL/INSTALLATION.)

< Previous Next >