Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

NON-RETURN VALVE INSPECTION [SKYACTIV-G 2.0]

< Previous Next >

2016 – MX-5 – Engine

NON-RETURN VALVE INSPECTION [SKYACTIV-G 2.0]

WARNING:

  • Highly pressurized fuel may spray out if the fuel line is cut. Due to the following dangers occurring with a fuel spray, always complete the “Fuel Line Safety Procedure” to prevent the fuel from spraying.

    • Fuel may cause irritation if it comes in contact with skin and eyes.

    • If fuel ignites and causes a fire, it may lead to serious injury or death, and damage to property and facilities.

  • A person charged with static electricity could cause a fire or explosion, resulting in death or serious injury. Before draining fuel, make sure to discharge static electricity by touching the vehicle body.

1. Complete the “BEFORE SERVICE PRECAUTION”. (See BEFORE SERVICE PRECAUTION [SKYACTIV-G 2.0].)

2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3. Remove the fuel pump unit. (See FUEL PUMP UNIT REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

4. Drain the fuel from the fuel tank to the position where the non-return valve is visible. (See FUEL DRAINING PROCEDURE [SKYACTIV-G 2.0].)

NOTE:

  • Non-return valve is integrated in the fuel tank.

  • The non-return valve is normally closed by the spring force.

5. Verify that the non-return valve is closed.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.