2016 – MX-5 – Transmission/Transaxle

CLUTCH DISC INSPECTION

1. Inspect the lining surface for discoloration and grease adhesion.

2. Inspect the torsion springs for weakness and the rivets for looseness.

3. Using a vernier caliper, measure the depth between the lining surface and the rivet head.

Minimum clutch disc thickness

• 0.3 mm {0.01 in}

• If it is less than the minimum, replace the clutch disc.

4. Measure the clutch disc runout using a dial gauge.

Maximum clutch disc runout

• 0.7 mm {0.03 in}

• If it exceeds the maximum, replace the clutch disc.

< Previous Next >