2016 – MX-5 – Engine

DRIVE SELECTION SWITCH REMOVAL/INSTALLATION [SKYACTIV-G 2.0]

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the selector lever knob. (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION.)

3. Remove the shift panel component. (See SHIFT PANEL REMOVAL/INSTALLATION.)

4. Remove the upper panel. (See UPPER PANEL REMOVAL/INSTALLATION.)

5. Remove in the order indicated in the table.

6. Install in the reverse order of removal.

Drive Selection Switch Installation Note

1. Install the drive selection switch so that the arrow shown in the figure is pointed toward the vehicle front.

< Previous Next >