Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DOOR LOCK ACTUATOR INSPECTION

< Previous Next >

2016 – MX-5 – Body and Accessories

DOOR LOCK ACTUATOR INSPECTION

LH

1. Fully close the door glass.

2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3. Remove the following parts:

a. Door trim (See DOOR TRIM REMOVAL/INSTALLATION.)

b. Door module panel (See DOOR MODULE PANEL REMOVAL/INSTALLATION.)

c. Door key cylinder (See DOOR KEY CYLINDER REMOVAL/INSTALLATION.)

d. Inner handle (See INNER HANDLE REMOVAL/INSTALLATION.)

e. Door latch and lock actuator (See DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)

4. Apply battery positive voltage and connect the ground to the door lock actuator terminals as indicated in the table below and verify the operation condition.

B+ Terminal

Ground Terminal

Operation

A

G

Lock

G

A

Unlock

RH

1. Fully close the door glass.

2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3. Remove the following parts:

a. Door trim (See DOOR TRIM REMOVAL/INSTALLATION.)

b. Door module panel (See DOOR MODULE PANEL REMOVAL/INSTALLATION.)

c. Inner handle (See INNER HANDLE REMOVAL/INSTALLATION.)

d. Door latch and lock actuator (See DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION.)

4. Apply battery positive voltage and connect the ground to the door lock actuator terminals as indicated in the table below and verify the operation condition.

B+ Terminal

Ground Terminal

Operation

K

E

Lock

E

K

Unlock

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.