VACUUM SENSOR 2 INSPECTION [SKYACTIV-G 2.0]
< Previous Next >
2016 – MX-5 – Engine
VACUUM SENSOR 2 INSPECTION [SKYACTIV-G 2.0]
Voltage Inspection
1. Connect the M-MDS to the DLC–2.
2. Switch the ignition ON (engine off).
3. Verify that the vacuum sensor 2 output voltage (PID: BBP) is within the specification. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-G 2.0)].) (See PCM INSPECTION [SKYACTIV-G 2.0].)
-
If not as specified, replace the power brake unit. (See POWER BRAKE UNIT REMOVAL/INSTALLATION.)
Specification (Reference)
© 2014 Mazda North American Operations, U.S.A.