Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

UPPER PANEL REMOVAL/INSTALLATION

< Previous Next >

2016 – MX-5 – Body and Accessories

UPPER PANEL REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the following parts:

a. Selector lever knob (AT) (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION.)

b. Shift lever knob (MT)

c. Shift panel component (See SHIFT PANEL REMOVAL/INSTALLATION.)

3. Move the upper panel in the order of arrows (1) and (2) shown in the figure and detach clips A and B, and the hooks from the rear console.

4. Remove the drive selection switch when replacing the upper panel. (AT) (See DRIVE SELECTION SWITCH REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

5. Remove the commander switch when replacing the upper panel. (See COMMANDER SWITCH REMOVAL/INSTALLATION.)

6. Install in the reverse order of removal.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.