Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DTC B1211:55, B1214:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)]

< Previous Next >

2016 – MX-5 – Restraints

DTC B1211:55, B1214:55 [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)]

System malfunction location

  • B1211:55: Configuration setting error (driver-side pre-tensioner seat belt structural malfunction)

  • B1214:55: Configuration setting error (passenger-side pre-tensioner seat belt structural malfunction)

Detection condition

WARNING:

  • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

  • SAS control module configuration setting has not been done correctly

  • Parts which have not been set to SAS control module are assembled

Fail-safe function

Not applicable

Possible cause

  • SAS control module configuration setting not implemented

  • SAS control module configuration setting invalid

  • Driver or passenger-side pre-tensioner seat belt assembly incorrect

  • SAS control module malfunction

System wiring diagram

Not applicable

Diagnostic Procedure

Step

Inspection

Action

1

PERFORM SAS CONTROL MODULE CONFIGURATION (AS-BUILT DATA USE)

Yes

Go to the next step.

No

DTC troubleshooting completed.

2

INSPECT PRE-TENSIONER SEAT BELT

  • Verify that the driver or passenger-side pre-tensioner seat belt is correctly installed.

  • Is the driver or passenger-side pre-tensioner seat belt correctly installed?

Yes

Go to the next step.

No

Correctly install the driver or passenger-side pre-tensioner seat belt.

Then go to the next step.

3

PERFORM SAS CONTROL MODULE DTC INSPECTION

Yes

Replace the SAS control module.

(See SAS CONTROL MODULE REMOVAL/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM].)

No

DTC troubleshooting completed.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.