2016 – MX-5 – Brakes

DSC OFF SWITCH INSPECTION

NOTE:

• The DSC OFF switch is integrated with the cluster switch.

• If the DSC OFF switch is replaced, replace the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)

1. Remove the cluster switch. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)

2. Measure the resistance between cluster switches B and C under the following conditions:

• If not within the specification, replace the cluster switch.

• Resistance with DSC OFF switch pressed and held (standard)

• 0 ohm

• Resistance with any switches not pressed (standard)

• 1,139.99—1,163.01 ohms

< Previous Next >