Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

FRONT ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION

< Previous Next >

2016 – MX-5 – Brakes

FRONT ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the front mudguard No.1 and front deflector as a single unit. (See FRONT MUDGUARD REMOVAL/INSTALLATION.)

3. Remove in the order indicated in the table.

4. Install in the reverse order of removal.

5. After installation, verify that there is no twisting in the front ABS wheel-speed sensor.

1

Connector

2

Harness clip

3

Bolt

4

Grommet

5

Front ABS wheel-speed sensor

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.