Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TIRE PRESSURE MONITORING SYSTEM OPERATION RECORD INSPECTION

< Previous Next >

2016 – MX-5 – Suspension

TIRE PRESSURE MONITORING SYSTEM OPERATION RECORD INSPECTION

Operation Record Verification Procedure

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initial screen.

a. Operation Record

3. Then, select the following from the screen menu.

a. Tire Pressure Monitoring System (TPMS)

4. Display the tire pressure monitoring system (TPMS) operation record according to the screen instructions.

Operation Record Use Example

  • For a customer who states that the tire pressure monitoring warning light was illuminated, verify if the customer knows how to correctly use the tire pressure monitoring system set switch, and give them advice on how to use it if necessary.

Example

Operation record display

  • The following can be understood from the operation record display indicated above.

    • Tire pressure monitoring system set switch operation record (M-MDS display: TPMS Learning Reset Button Record)

    • Elapsed days displayed is 65,535 (displays if operation record is not recorded), and the tire pressure monitoring system set switch has not been pressed even once.

      Tire pressure monitoring system warning light illumination operation record (M-MDS display: TPMS Warning Lamp illumination)

    • The DSC CM detects a low tire pressure four days before, and the total traveled distance (M-MDS display: Odometer) at that time was 403 km {250 mile}, the vehicle speed (M-MDS display: Speed) was 38 km/h {24 mph}, and the maximum vehicle speed from when the pressure monitoring system warning light illuminated was 101 km/h {62.8 mph}.

  • Based on the above information, provide the following advise, as there is the possibility that the customer does not understand how to correctly use the tire pressure monitoring system set switch.

    • If the tire pressure monitoring warning light was illuminated, it will be necessary to adjust the tire pressures on all four tires to the specification and initialize the system by pressing the tire pressure monitoring system set switch. (See TIRE PRESSURE MONITORING SYSTEM INITIALIZATION PROCEDURE.)

    • If the vehicle is driven at high speed with low tire pressure, there is the danger of a tire rupture occurring.

Reference information regarding operation history of tire pressure monitoring system warning light illumination
  • The tire pressure monitoring system warning light illumination status and the operation record are as displayed in the table, and if the tire pressure monitoring system warning light is illuminated after flashing due to a system malfunction, the operation record is not recorded.

TIRE PRESSURE MONITORING SYSTEM WARNING LIGHT

Operation record

Tire pressure decrease

On

Recorded

Tire pressure monitoring system malfunction

After flashing for about 1 min, continuous illumination.

Not recorded

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.