Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DTC B1206:00/B143A:00/U2107:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)]

< Previous Next >

2016 – MX-5 – Restraints

DTC B1206:00/B143A:00/U2107:00 [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)]

System malfunction location

  • B1206:00:SAS control module operation (deployment) (fuel cut signal output)

  • B143A:00:SAS control module operation (collision detection) signal output

  • U2107:00:SAS control module operation (deployment) signal output

Detection condition

WARNING:

  • Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

  • SAS control module operates (deploys) (air bag module or pre-tensioner seat belt)

Fail-safe

Possible cause

  • SAS control module operation (deployment)

  • Vehicle collision

  • SAS control module malfunction

System wiring diagram

Diagnostic Procedure

Step

Inspection

Action

1

VERIFY VEHICLE COLLISION

  • Explain to the customer that the vehicle was hit.

  • Has the vehicle been hit?

Yes

No

Go to the next step.

2

VERIFY THAT REPAIRS HAVE BEEN COMPLETED

Yes

Repeat the inspection from Step 1.

No

Go to the next step.

3

VERIFY IF OTHER DTCs DISPLAYED

  • Are any other DTCs displayed?

Yes

Repair the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)].)

No

DTC troubleshooting completed.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.