2016 – MX-5 – DriveLine/Axle

REAR WHEEL HUB BOLT REPLACEMENT

1. Remove the rear brake caliper component and suspend it in a place out of the way using a cable. (See REAR BRAKE (DISC) REMOVAL/INSTALLATION.)

2. Remove the rear disc plate. (See REAR BRAKE (DISC) REMOVAL/INSTALLATION.)

3. Remove the rear wheel hub bolt using the SST as shown in the figure.

4. Place a new rear wheel hub bolt in the wheel hub component.

5. Install the rear wheel hub bolt by placing an appropriate-sized washer on the wheel hub component and tightening the wheel nut as shown in the figure.

< Previous Next >