HORN REMOVAL/INSTALLATION
2016 – MX-5 – Body and Accessories
HORN REMOVAL/INSTALLATION
Horn LO
CAUTION:
-
Remove the horn LO and the bracket as a single unit. Otherwise, the sound quality may change.
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the front under cover. (See FRONT UNDER COVER REMOVAL/INSTALLATION.)
3. Remove the seal plate (RH). (See SEAL PLATE REMOVAL/INSTALLATION.)
4. Disconnect the connectors.
5. Remove the bolt.
6. Remove the horn LO.
7. Install in the reverse order of removal.
Horn HI
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Partially peel back the front mudguard No.1 (RH). (See FRONT MUDGUARD REMOVAL/INSTALLATION.)
3. Disconnect the connector.
4. Remove the bolt.
5. Remove the horn HI.
6. Install in the reverse order of removal.