2016 – MX-5 – Body and Accessories

AUTO LEVELING SENSOR SHORT-CORD REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. While pressing the clip A tabs in the direction of arrows (1) shown in the figure, press the clip A in the direction of arrow (2) to detach the clip A tabs from the auto leveling sensor.

3. While pressing the clip B tabs in the direction of arrows (1) shown in the figure, press the clip B in the direction of arrow (2) to detach the clip B tabs from the auto leveling sensor.

4. Disconnect the connectors.

5. Remove the auto leveling sensor short-cord.

6. Install in the reverse order of removal.

< Previous Next >