2016 – MX-5 – Engine

STARTER INTERLOCK SWITCH INSPECTION [SKYACTIV-G 2.0]

CAUTION:

1. Do not reuse the starter interlock switch if it is removed from the vehicle even once. Replace with a new starter interlock switch when installing.

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Disconnect the starter interlock switch connector.

3. Verify that the continuity is as indicated in the table using a ohmmeter.

• If the continuity is not as indicated in the table, replace the starter interlock switch.

  (See STARTER INTERLOCK SWITCH REMOVAL/INSTALLATION.)

< Previous Next >