2016 – MX-5 – Body and Accessories

WINDSHIELD GARNISH REMOVAL/INSTALLATION

1. Open the convertible top.

2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3. Remove the following parts:

a. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

b. Female wedge (See FEMALE WEDGE REMOVAL/INSTALLATION.)

c. Front header trim (See FRONT HEADER TRIM REMOVAL/INSTALLATION.)

4. Remove the nuts.

CAUTION:

• If the tape-wrapped flathead screwdriver is inserted too deeply when detaching windshield garnish clips A and clips B, it could damage the windshield. When detaching them, be careful not to scratch the windshield.

5. Insert a tape-wrapped flathead screwdriver into the position shown in the figure, rotate it in the direction of the arrows and detach windshield garnish clips A and clips B.

6. Remove the windshield garnish.

7. Install in the reverse order of removal.

< Previous Next >