PURGE SOLENOID VALVE INSPECTION [SKYACTIV-G 2.0]
< Previous Next >
2016 – MX-5 – Engine
PURGE SOLENOID VALVE INSPECTION [SKYACTIV-G 2.0]
Airflow Inspection
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the seal cover. (See SEAL COVER REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)
3. Remove the purge solenoid valve. (See PURGE SOLENOID VALVE REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)
4. Inspect airflow between the ports under the following conditions.
|
Measured condition |
Continuity between ports A—B |
|
When voltage is not applied between terminals A and B |
No airflow |
|
When voltage is applied between terminals A and B |
Airflow detected |
-
If not as specified, replace the purge solenoid valve. (See PURGE SOLENOID VALVE REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)
© 2014 Mazda North American Operations, U.S.A.