LIGHTING SYSTEM PERSONALIZATION
2016 – MX-5 – Body and Accessories
LIGHTING SYSTEM PERSONALIZATION
CAUTION:
-
The personalization feature may not be set correctly if [Not equipped] is selected in the setting displayed on the Mazda Modular Diagnostic System (M-MDS). Do not select [Not equipped] in the setting displayed on the Mazda Modular Diagnostic System (M-MDS).
NOTE:
-
Settings of some personalization features displayed on the Mazda Modular Diagnostic System (M-MDS) cannot be changed depending on the vehicle specification.
-
A personalization feature has been adopted with which settings for each function can be changed.
-
The setting for each function can be switched using the Mazda Modular Diagnostic System (M-MDS) or the center display (with center display). Refer to the [LIGHTING SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE] in the workshop manual for the detailed setting procedure.
Auto Light System
Mazda Modular Diagnostic System (M-MDS)
|
Mazda Modular Diagnostic System (M-MDS) display |
Function |
Initial setting |
Setting contents |
Control module |
|
Auto Headlight On |
Auto light sensitivity can be changed. |
Standard (All Others) |
Extra Low (Except Japan)/Low (All Others)/Standard (All Others)/High (Except Japan)/Extra High (Except Japan) |
BCM |
Center display
|
Display of center display |
Function |
Initial setting |
Setting contents |
Control module |
|
Auto Headlight On |
Auto light sensitivity can be changed. |
Medium |
Light / Medium Light / Medium / Medium Dark / Dark |
BCM |
NOTE:
-
If the mode is set to [Extra High (Except Japan)] and [High (Except Japan)], the illuminance level for turning on the headlight LO, TNS (parking lights), and panel light increases. Therefore, each light turns on when the ambient light is brighter than when the level is set to [Standard (All Others)]. In addition, if the mode is set to [Extra Low (Except Japan)] or [Low (All Others)], the illuminance level for turning on the headlight LO, TNS (parking lights), and panel light decreases. Therefore, each light turns on when the ambient light is darker than when the level is set to [Standard (All Others)].
-
The personalization feature may not be set correctly if [Japan Only], such as [Extra High (Japan Only)], is selected. Do not select [Japan Only].
-
The auto light sensitivity setting turns on/off the headlight LO, TNS (parking lights), and panel light according to the following illumination levels.
NOTE:
-
The following illumination levels are a reference. The illumination levels vary depending on the surrounding conditions (weather, reflection off buildings).
|
Setting contents |
Lights on operation |
Lights off operation |
||
|
Panel light On |
Panel light On |
Panel light On |
Panel light Off |
|
|
TNS (parking lights) Off |
TNS (parking lights) On |
TNS (parking lights) Off |
TNS (parking lights) Off |
|
|
Headlight LO Off |
Headlight LO On |
Headlight LO Off |
Headlight LO Off |
|
|
Extra High |
1,000 lux |
4,000 lux |
8,000 lux |
2,000 lux |
|
High |
850 lux |
3,000 lux |
6,000 lux |
1,700 lux |
|
Standard |
700 lux |
2,000 lux |
4,000 lux |
1,400 lux |
|
Low |
550 lux |
1,000 lux |
2,000 lux |
1,100 lux |
|
Extra Low |
400 lux |
500 lux |
1,000 lux |
800 lux |
Auto Light-Off System
Mazda Modular Diagnostic System (M-MDS)
|
Mazda Modular Diagnostic System (M-MDS) display |
Function |
Initial setting |
Setting contents |
Control module |
|
Headlight Off Timer |
The headlight emitted time of the auto light off timer can be changed. |
30 seconds. |
0 seconds./30 seconds./60 seconds./90 seconds./120 seconds. |
BCM |
Center display
|
Display of center display |
Function |
Initial setting |
Setting contents |
Control module |
|
Headlight Off Timer |
The headlight emitted time of the auto light off timer can be changed. |
30 seconds |
120 seconds / 90 seconds / 60 seconds / 30 seconds / Off |
BCM |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|
Turn light system
Mazda Modular Diagnostic System (M-MDS)
|
Mazda Modular Diagnostic System (M-MDS) display |
Function |
Initial setting |
Setting contents |
Control module |
|
Three-Flash Turn Signal |
The operation of the three-flash turn signal function can be disabled. |
On |
Off/On |
BCM |
Center display
|
Display of center display |
Function |
Initial setting |
Setting contents |
Control module |
|
3-Flash Turn Signal |
The turn light system can be switched between operable and inoperable. |
On |
On / Off |
BCM |
|
Reset |
Returns the setting content of the turn light system to the initial setting. |
No |
No / Yes |
|
Coming Home Light System
Mazda Modular Diagnostic System (M-MDS)
|
Mazda Modular Diagnostic System (M-MDS) display |
Function |
Initial setting |
Setting contents |
Control module |
|
Coming Home Light operation time |
The coming home light system operation time can be switched. |
30 seconds. |
0 seconds./30 seconds./60 seconds./90 seconds./120 seconds. |
BCM |
Center display
|
Display of center display |
Function |
Initial setting |
Setting contents |
Control module |
|
Coming Home Lights Timer |
The coming home light system operation time can be switched. |
30 seconds |
Off / 30 seconds / 60 seconds / 90 seconds / 120 seconds |
BCM |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|
Leaving Home Light System
Mazda Modular Diagnostic System (M-MDS)
|
Mazda Modular Diagnostic System (M-MDS) display |
Function |
Initial setting |
Setting contents |
Control module |
|
Leaving Home Light system |
The leaving home light system can be switched between operable and inoperable. |
On |
Off/On |
BCM |
Center display
|
Display of center display |
Function |
Initial setting |
Setting contents |
Control module |
|
Leaving Home Lights |
The leaving home light system can be switched between operable and inoperable. |
On |
On / Off |
BCM |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|
Dimmer switch is operated
|
Function |
Initial setting |
Setting contents |
Control module |
|
The leaving home light system can be switched between operable and inoperable. |
Operable |
Operable/Inoperable |
BCM |
Room Light Control System
Mazda Modular Diagnostic System (M-MDS)
|
Mazda Modular Diagnostic System (M-MDS) display |
Function |
Initial setting |
Setting contents |
Control module |
|
Interior Lighting Timeout-Door Open |
|
30 minutes. |
30 minutes./60 minutes./10 minutes. |
BCM |
|
Interior Lighting Timeout-Door Closed |
The map light illumination time after all doors are closed can be changed. |
15 seconds. |
15 seconds./7.5 seconds./30 seconds./60 seconds. |
BCM |
Center display
|
Display of center display |
Function |
Initial setting |
Setting contents |
Control module |
|
Interior Light Timeout – Doors Open |
|
30 minutes |
60 minutes / 30 minutes / 10 minutes |
BCM |
|
Interior Light Timeout – Doors Closed |
The map light illumination time after all the doors are closed can be changed. |
15 seconds |
60 seconds / 30 seconds / 15 seconds / 7.5 seconds |
BCM |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|
Daytime Running Light (DRL) System (Except Canada)
Using Light Switch
NOTE:
-
Refer to the workshop manual for the detailed setting procedure.
|
Function |
Initial setting |
Setting contents |
Control module |
|
The daytime running light (DRL) system function can be set. |
On (daytime running light (DRL) illumination) |
Off (daytime running light (DRL) non-illumination)/On (daytime running light (DRL) illumination) |
BCM |
Center display
|
Display of center display |
Function |
Initial setting |
Setting contents |
Control module |
|
Daytime Running Lights |
The daytime running light (DRL) system function can be set. |
On |
On / Off |
BCM |
|
Reset |
Returns the setting content of the lighting system to the initial setting. |
No |
No / Yes |
|