2016 – MX-5 – Restraints

CRASH ZONE SENSOR [STANDARD DEPLOYMENT CONTROL SYSTEM]

Purpose

• The crash zone sensor detects an impact during a frontal or frontal offset collision to the vehicle.

Function

• The crash zone sensor converts the detected impact to an electrical signal.

Construction

• The crash zone sensor is built into the crash sensor.

• The crash zone sensor is located on the front bumper reinforcement on the back side of the front bumper.

• Two crash zone sensors are installed for independent impact detection on the left and right.

Operation

• For the crash zone sensor operation, refer to the [AIR BAG SYSTEM [STANDARD DEPLOYMENT CONTROL SYSTEM]]. (See AIR BAG SYSTEM [STANDARD DEPLOYMENT CONTROL SYSTEM].)

Fail-safe

• Not applicable

< Previous Next >