< Previous Next >

2016 – MX-5 – Body and Accessories

REAR FENDER PANEL REMOVAL [PANEL REPLACEMENT]

Symbol Marks

Removal Procedure

1. Drill the 33 locations indicated by (A) shown in the figure.

2. Drill the 22 locations indicated by (B) shown in the figure.

3. Drill the 3 locations indicated by (C) shown in the figure and bend the end of the rear deck panel in the direction of the arrow.

4. Drill the 18 locations indicated by (D) shown in the figure, then remove the rear fender panel.

< Previous Next >