< Previous Next >

2016 – MX-5 – Body and Accessories

FLOOR SIDE PANEL REMOVAL [PANEL REPLACEMENT]

Symbol Marks

Removal Procedure

1. Rough cut the location indicated by (A) shown in the figure.

2. Drill the 28 locations indicated by (B) shown in the figure, then remove the rear side frame (upper) and floor side panel No.1.

3. Drill the 5 locations indicated by (C) shown in the figure.

4. Drill the 7 locations indicated by (D) from front wheel housing shown in the figure.

5. Remove the floor side panel No.2.

< Previous Next >