< Previous Next >

2016 – MX-5 – Body and Accessories

HINGE PILLAR (OUTER) REMOVAL [PANEL REPLACEMENT]

Symbol Marks

Removal Procedure

CAUTION:

• Avoid cutting with a blowtorch or similar tools as the insulator is flammable shown in the figure.

1. Drill the 34 locations indicated by (A) shown in the figure, then remove the cowl side panel.

2. Drill the 56 locations indicated by (B) shown in the figure, then remove the hinge pillar (outer).

3. Drill the 11 locations indicated by (C) shown in the figure, then remove the front pillar reinforcement.

4. Drill the 8 locations indicated by (D) from the room side shown in the figure, then remove the front pillar (inner).

< Previous Next >