SECURITY AND LOCKS PERSONALIZATION
2016 – MX-5 – Body and Accessories
SECURITY AND LOCKS PERSONALIZATION
CAUTION:
-
The personalization feature may not be set correctly if [Not equipped] is selected in the setting displayed on the Mazda Modular Diagnostic System (M-MDS). Do not select [Not equipped] in the setting displayed on the Mazda modular diagnostic system (M-MDS).
-
A personalization feature has been adopted which switches each function between operation/non-operation.
-
The settings of the following functions, and warning and guidance functions for the system can be turned ON/OFF optionally.
-
The Mazda Modular Diagnostic System (M-MDS) is required to perform the setting. Refer to the [SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE] in the workshop manual for the detailed setting procedure.
Advanced Keyless Entry System
Mazda modular diagnostic system (M-MDS) used
|
Mazda modular diagnostic system (M-MDS) display |
Function |
Initial setting |
Setting contents |
Control unit |
|
Advanced keyless function.*1 |
Advanced keyless entry system and push button start system functions can be disabled (disable). |
Enable |
Enable/Disable |
Start stop unit |
|
Walk Away Lock. |
The out-of-area (reception area) type auto lock function can be set. |
OFF |
OFF/ON |
Start stop unit |
|
Auto Relock Time. |
The operation start time of the auto re-lock function can be changed. |
60 seconds. |
30 seconds./60 seconds./90 seconds. |
Start stop unit |
|
Keyless Lock Beep Volume.*2 |
The keyless beeper volume can be adjusted. |
Medium |
Off/Low/Medium/High |
Start stop unit |
- *1
- Because the push button start system function has been disabled, start the engine while touching the center of the push button start with the upper part of the remote transmitter.
- *2
- Settings can be changed by operation of the remote transmitter button. Refer to the [SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE] in the workshop manual for the detailed setting procedure.
Using center display
|
Display of center display |
Function |
Initial setting |
Setting contents |
Control unit |
|
Keyless Lock Beep Volume |
The keyless beeper volume can be adjusted. |
Medium |
Off / Low / Medium / High |
Start stop unit |
|
Door Relock Time |
The operation start time of the auto re-lock function can be changed. |
60 seconds |
30 seconds / 60 seconds / 90 seconds |
Start stop unit |
|
Walk Away Lock |
The out-of-area (reception area) type auto lock function can be set. |
OFF |
OFF / ON |
Start stop unit |
|
Reset |
The setting content for the advanced keyless entry system can be returned to the initial value. |
NO |
YES / NO |
|
Keyless Entry System
Mazda modular diagnostic system (M-MDS) used
|
Mazda modular diagnostic System (M-MDS) display |
Function |
Initial setting |
Setting contents |
Control unit |
|
Advanced keyless function.*1 |
The advanced keyless entry system and push button start system functions can be disabled (unusable). |
Enable |
Enable/Disable |
Start stop unit |
|
Auto Relock Time. |
The operation start time of the auto re-lock function can be changed. |
60 seconds. |
30 seconds./60 seconds./90 seconds. |
Start stop unit |
- *1
- Because the push button start system function has been disabled, start the engine while touching the center of the push button start with the upper part of the remote transmitter.
Using center display
|
Display of center display |
Function |
Initial setting |
Setting contents |
Control unit |
|
Door Relock Time |
The operation start time of the auto re-lock function can be changed. |
60 seconds |
30 seconds / 60 seconds / 90 seconds |
Start stop unit |
|
Reset |
The setting content for the keyless entry system can be returned to the initial value. |
NO |
YES / NO |
|
Power Door Lock System
Mazda modular diagnostic system (M-MDS) used
|
Mazda Modular Diagnostic System (M-MDS) display |
Function |
Initial setting |
Setting contents |
Control unit |
|
Unlock Mode (Without Touch Sensor) |
2-step unlocking system can be set. |
Once: Driver’s, Twice: All Doors. |
Touch Once: All Doors. / Once: Driver’s, Twice: All Doors. |
Start stop unit |
|
Auto Door Lock Mode*1 |
Auto door lock function can be changed. |
Lock: Driving, Unlock: IGN Off. |
Off/Lock: When Driving, Unlock: In Park./Lock When Driving./Lock: Driving, Unlock: IGN Off./Lock When Shifting Out Of P./Lock: Shift From P, Unlock: In P. |
BCM |
- *1
- Settings can be changed by operation of the door lock switch. Refer to the [CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE] in the workshop manual for the detailed setting procedure.
Using center display
|
Display of center display |
Function |
Initial setting |
Setting contents |
Control unit |
|
Unlock Mode |
2-step unlocking system can be set. |
Once: Driver’s, Twice: All Doors. |
Once: ALL Doors / Once Driver’s, Twice: All Doors |
Start stop unit |
|
Auto Door Lock Mode |
Auto door lock function can be changed. |
Lock: When Driving, Unlock: IGN Off |
Off / Lock: When Driving, Unlock: In Park / Lock: When Driving / Lock: When Driving, Unlock: IGN Off / Lock: Shifting from Park / Lock: Shifting from Park, Unlock: In Park |
BCM |
|
Reset |
Returns the setting content of the door lock system to the initial setting. |
NO |
YES / NO |
|