2016 – MX-5 – Body and Accessories

DOOR LOCK SWITCH REMOVAL/INSTALLATION

Driver’s Side

NOTE:

• The driver’s side door lock switch cannot be removed as a single unit because it is built into the power window main switch. If the driver’s side door lock switch is replaced, replace the power window main switch. (See POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION.)

Passenger’s Side

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the door trim. (See DOOR TRIM REMOVAL/INSTALLATION.)

3. While pulling the power window subswitch in the direction of arrow (1) shown in the figure, pull the door lock switch in the direction of arrow (2) shown in the figure, and detach the door lock switch tabs from the power window subswitch.

4. Detach all of the door lock switch tabs from the power window switch and remove the door lock switch.

5. Install in the reverse order of removal.

< Previous Next >