2016 – MX-5 – Body and Accessories

TRUNK LID LATCH SWITCH INSPECTION

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION.)

3. Remove the trunk lid latch and release actuator. (See TRUNK LID LATCH AND RELEASE ACTUATOR REMOVAL/INSTALLATION.)

4. Verify that the continuity is as indicated in the table.

• If not as indicated in the table, replace the trunk lid latch and release actuator.

NOTE:

• When inspecting the latch condition of the trunk lid latch switch, press in the latch lever using a flathead screwdriver and set it to the latched position.

  

< Previous Next >