Menu +
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

TRUNK LID ADJUSTMENT

< Previous Next >

2016 – MX-5 – Body and Accessories

TRUNK LID ADJUSTMENT

1. Measure the clearance and height difference between the trunk lid and the vehicle body.

    Standard clearance

  • a: 2.4—4.4 mm {0.10—0.17 in}

  • b: –1.0—1.0 mm {–0.039—0.039 in}

  • If the measured value is not within the standard clearance, adjust the clearance using the following procedure.

    • Loosen the trunk lid installation bolts, move the trunk lid, and adjust the installation position. (See TRUNK LID REMOVAL/INSTALLATION.)

    • Tighten the trunk lid installation bolts. (See TRUNK LID REMOVAL/INSTALLATION.)

    • Verify that the clearances and differences in height of the trunk lid and the vehicle body are within the standard clearance.

2. Measure the clearance and height difference between the trunk lid and the rear fender panel.

    Standard clearance

  • a: 2.3—4.3 mm {0.10—0.16 in}

  • b: –1.0—1.0 mm {–0.039—0.039 in}

3. Measure the clearance between the trunk lid and the rear bumper.

    Standard clearance

  • a: 6.5—9.5 mm {0.26—0.37 in}

4. Spray or pour water on the trunk lid and surrounding area using a hose or a high pressure car wash machine, and verify that there is no water leakage.

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.