Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

FUEL-FILLER LID LOCK ACTUATOR INSPECTION

< Previous Next >

2016 – MX-5 – Body and Accessories

FUEL-FILLER LID LOCK ACTUATOR INSPECTION

1. Open the fuel-filler lid.

2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

3. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION.)

4. Partially peel back the trunk side trim (LH) to the position allowing removal of the fuel-filler lid lock actuator. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

5. Disconnect the fuel-filler lid lock actuator connector. (See FUEL-FILLER LID LOCK ACTUATOR REMOVAL/INSTALLATION.)

6. Apply battery positive voltage and connect the ground to the fuel-filler lid lock actuator terminals as indicated in the table below and verify the operation condition.

B+ terminal

Ground terminal

Operation

A

B

Lock

B

A

Unlock

< Previous Next >

© 2014 Mazda North American Operations, U.S.A.