FRONT ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION
< Previous Next >
2016 – MX-5 – Brakes
FRONT ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the front mudguard No.1 and front deflector as a single unit. (See FRONT MUDGUARD REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5. After installation, verify that there is no twisting in the front ABS wheel-speed sensor.
|
1 |
Connector |
|
2 |
Harness clip |
|
3 |
Bolt |
|
4 |
Grommet |
|
5 |
Front ABS wheel-speed sensor |
© 2014 Mazda North American Operations, U.S.A.