< Previous Next >

2016 – MX-5 – Body and Accessories

WHEEL APRON COMPONENT INSTALLATION [PANEL REPLACEMENT]

Symbol Marks

Installation Procedure

1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.

2. Drill holes for the plug welding before installing the new parts.

3. After temporarily installing new parts, make sure the related parts fit properly.

4. Spot weld the 14 locations indicated by (A) shown in the figure.

5. Plug weld the 14 locations indicated by (B) shown in the figure.

6. Plug weld the 21 locations indicated by (C) shown in the figure, then install the wheel apron component.

< Previous Next >